Type : Mapelatex 117
Product : Latex Additive
Colour : White
Weight : 18.00kg
Packing : 48Pail/Pallet
Min Order Per : 1 Pail
Water-resistant, latex additive for bonding slurries and for improving mortar mixes.
Where to use
As additive for site-mixed mortars for:
- Screeds and renders
- Tile adhesives
- Brick jointing
- Patch repairs
Mixed with cement to prepare bonding slurries for:
- Bonding old to new concrete
- Installing floor screeds
Advantages
Latex-admixed mortars:
- Improved strengths and mechanical properties
- Improved adhesion
- Improved abrasion resistance
- Improved chemical resistance
- Reduced water permeability
- Safe for potable water
- Non-corrosive
Bonding slurries:
- Good bonding strength
Application examples
- Application of cement-based bonding slurry admixed with MapeLatex
- Application of cement-based bonded screed admixed with MapeLatex
- Scratch-coat mortar admixed with MapeLatex
- Cement-based render with MapeLatex
Technical Data (Typical Values)
| Mapeset 111 + MapeLatex117 | |||||||||
| Mix ratio, by weight (%) | 30 | ||||||||
| Viscosity (Pa. s) | 385 | ||||||||
| Mix Density (g/cm³) | 1.787 | ||||||||
| Wetting capability (%) at 30°C | |||||||||
| –         5’ | 100 | ||||||||
| –         10’ | 90 | ||||||||
| –         15’ | 90 | ||||||||
| –         20’ | 80 | ||||||||
| –         25’ | 70 | ||||||||
| Tensile Adhesion Strength, 28 days – standard condition(Mpa) | 1.3 | ||||||||
| Tensile Adhesion Strength, 28 days – water immersion (Mpa) | 0.7 | ||||||||
| Tensile Adhesion Strength, 28 days – heat ageing (Mpa) | 1.4 | ||||||||
