Type : Thick Render 06
Product : Render
Colour : Grey
Weight : 40.00kg
Packing : 50Bag/Pallet
Min Order Per : 1 Bag
Coarse premixed cement render for brick, block and fairface concrete walls, patching and general use in dry or wet interior and exterior.
E.MIX THICK RENDER 06 is a high quality coarse cement-based plaster intended for brick, block and concrete walls, patching and other rendering in thick layer. It is specially formulated for the replacement of conventional cement-sand render. E.MIX THICK RENDER 06 can also be used as a joint mortar for bed thickness of 10 – 15 mm.
E.MIX THICK RENDER 06 is suitable for dry or wet interior as well as exterior conditions and serves as render coat underneath thin plaster or Weber Tile Fixing Solution. E.MIX THICK RENDERÂ 06 should not be used on painted surfaces.
Uses
- Interior and exterior coarse cement render for brick, block and concrete walls, patching and other rendering in thick layer
- Suitable usage for dry or wet conditions
Features and Benefits
- Single component: fixed mixing proportion, ensure the quality of work
- Shrinkage compensated: reduce the chance of shrinkage cracks
- Suitable for tiling with receiving E.MIX TILE ADHESIVE and TILE GROUT series products
- Suitable to receive paint with E.MIX SKIM COAT series products
- Compatible to cementitious E.MIX WATERPROOFING series products
- Convenient: specially formulated to replace conventional cement-sand render
Procedures
Substrate Preparations
- Ensure substrate is clean and solid. Remove loose particles, grease and traces of foreign materials that may affect adhesion
- On dry absorbent substrate, that surface is moistened if necessary.
- On concrete surfaces, it is recommended that a spatterdash coat be applied to the receiving substrate to provide better key for the render layer.
Â
Mixing and Installation
- Prepare the plaster by adding the dry product to water. A suitable mixing time is 3 – 7 minutes depending on the type of mixing equipment. Use the mixture within 1 hour from mixing.
- Application of E.MIX THICK RENDER can be done by hand or machine. For smooth final finish, thin plaster are recommended on top of the E.MIX THICK RENDER.
- The wear resistance and adhesion of the render can be further enhanced by adding E.MIX RENDER ADMIX. In hot and dry conditions, the plaster should be cured with water spray during the first 2 days.
Â
Storage and Packing
E.MIX THICK RENDER is delivered in 40 kg bag.
Storage life is 6 months if the product is stored in a dry place.
Technical Data
Colour | Grey | ||||||||||
Binder | Cement | ||||||||||
Filler | Graded silica sand | ||||||||||
Aggregate size | 4.0mm max | ||||||||||
Additives | Water Soluble Additives to Improve Workability, Water Retention, Durability and Adhesion | ||||||||||
Density | 1.8kg/litre (dry) ; 1.9kg/litre (wet) | ||||||||||
Pot Life | Approx. 1 hour | ||||||||||
Coat thickness | 10 – 25 mm per coat | ||||||||||
Coverage | Approx. 1.7kg/m²/mm thick | ||||||||||
Water demand | Approx. 6 – 6.8 litres/40 kg bag |