Type : Fuga Fresca
Product : Colour Grout
Colour : White, Silver Grey, Cement Grey, Jasmine
Weight : ± 0.18kg
Packing : 12Pcs/Box
Min Order Per : 1 Pcs
Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean.
Recommendations
- Do not use for external applications or on surfaces subjected to continuous immersion (swimming pools, basins, etc.)
- If the product is used on terracotta floors or on stone material with a porous, absorbent surface, it must only be applied on the joints to avoid staining the tiles
- Apply the product on cementitious joints which have been cured for at least 48 hours
- Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethane based products
- Do not use Fuga Fresca to consolidate friable grout or those with poor mechanical strength due to inadequate hydration
- If the colour difference between the original colour and the new colour is too great, it may be necessary to apply more than one coat
- Technical Data Sheet (TDS)
Technical Data
| Product Identity | |||||||||
| Consistency | thick liquid | ||||||||
| Colours | available in 34 colours | ||||||||
| Density (g/cm³) | 1.37 | ||||||||
| pH | 8 | ||||||||
| Dry solids content (%) | 58 | ||||||||
| Brookfield viscosity (Pa·s) | 10.6 (# 6 – 10 rpm) | ||||||||
| Covering capacity (contrast ratio) | 96.93 | ||||||||
| Dirt pick-up (UNI 10792) | ΔE* 0.27 | ||||||||
| Abrasion resistance (DIN 53778) | > 10,000 cycles | ||||||||
| Weatherometer resistance (ASTM G155), cycle 1 | ΔE* 0.04 | ||||||||
| Application temperature range | from +5°C to +35°C | ||||||||
| Ready for foot traffic | 2 hours | ||||||||
| Waiting time before cleaning the tiling with water | 24 hours | ||||||||
